Those people who, among the first things after waking up in the morning, turn on the computer.
I will appreciate the idea of this article.
This time I want to tell you “TeamViewer wake on LAN not working”.
In this article, I tell you more than just tips.
I want to help you and for that reason, I will tell you the way to fix the problem “TeamViewer wake on LAN not working”.
Do not miss it! Do you want to know more? Well, keep reading this specialized article with the essential point of view.
TeamViewer wake on LAN not working
The fastest way to turn on the computer is to turn it off with restart and suspension.
So to start the PC, just move the mouse or press a key on the keyboard to wake it from suspension.
In the presence of certain conditions, you can wake up and turn on the computer via a wifi network, from the mobile phone, with the Wake-on-Lan.
So as to immediately find the computer on and ready, if TeamViewer wake on LAN not working.
So let’s see how to configure the switching on or waking up of a computer via the network and how you can use an Android phone to switch on a PC remotely.
The main prerequisite for turning on a PC on the network is that it is compatible with Wake-on-Lan.
All modern and new PCs should have this possibility while those older than 4 or 5 years are to be verified.
To enable TeamViewer wake on LAN, you need to access the bIOS
If TeamViewer wake on LAN not working, in the Bios, you need to look for the power settings ( Power options ) and enable the Wake-on-Lan or wake-up or network boot.
The name of the setting varies from pc to pc, depending on the motherboard and bios; once found. You must enable it ( Enabled ) and save the configuration.
From the Windows PC then you must also enable the switch on via the network from the driver configuration.
Precisely, open the control panel -> Device or peripheral manager -> Network cards -> find the LAN card that can be wifi (Wireless) or cable and enable, in the Advanced tab, the items concerning the Wake on Magic Packet.
Wake On Pattern Match and Wake On Capabilities ( on Magic Packet & Pattern Match ).
Power Management tab
Also, go to the Power Management tab and enable, if present, the wake mode from Magic Packet.
If these options are not present, the network adapter does not support turning on the computer remotely and receiving Magic Packets.
All LAN cards have this function while on Wi-Fi cards it is less obvious.
To turn on a computer remotely with the Wake-On-Lan, it must not be turned off but must be in suspending or hibernation mode, or in any case powered, with the main switch on.
On laptops (if they support this way of turning on the computer via the network) the plug must be connected or there must be a charged battery.
The LAN must be managed by a router, so solutions such as Ad hoc networks or Microsoft virtual networks do not work.
On Windows 8 and Windows 10, Fast Startup must be disabled.
If all the conditions are met, the computer can be turned on via the network from another computer (the PCs must be in the same LAN, at home or in the office) by sending the Magic Packet.
You can use a command line program such as WOL to send the Magic Packet, launching it like this from the DOS prompt: path / Wol.exe “mac address” “IP address” (without quotes).
More easily, you can use a GUI program like WOL Magic Packet Sender.
From this tool, you need to indicate the network parameters of the computer to be turned on: Subnet Mask, IP address and mac address and you can also do the test (with the two PCs on) to see if sending the magic packet works.
Click here to learn more about TeamViewer is not working on partner PC.
The last thing left to find out is the computer’s mac address.
The Mac Address is the physical address of a network card (of the type: 00-30-05-2B-BE-22 ) and can be found by going to the details of the network properties ( Control Panel \ Network and Internet \ network> right click on the active LAN> Status -> Details ).
Alternatively, use the Simple MAC tool
If the ignition via the network works and if it can be done from the Wifi card, on the Wireless network, then you can use an Android mobile phone to wake up the computer with the free WOL application downloadable from the Market.
In the application configuration just indicate the network name of the computer you want to turn on remotely, the physical address or MAC Address of the computer, and the SSID (name) of the wireless network.
You don’t need to enter all the security information, even if the WiFi network is protected.
After putting your computer into sleep or hibernation mode, try to wake up from your Android phone.
If all goes well, try powering on after a regular shutdown as well.
If it doesn’t work, or something is missing in the configuration phase or the pc doesn’t support waking up via LAN wifi.
Most computers can be configured to accept the magic packet that wakes them up.
PC Auto Waker can also be set automatically, so as soon as the Android smartphone connects to the home or office Wi-Fi network, the connected computer turns on.
If this is your first time dealing with this Wake-on-Lan setting, print this guide, try to follow it step by step and leave a comment to try to solve any problems
If you find it difficult, you can instead use the TeamViewer program which in its Extra options gives the possibility to configure the Wake On Lan in an automatic and simpler way.
At that point, from any computer or mobile phone on which TeamViewer is installed, the PC can be woken up remotely, even via the internet.
Conclusion:
If you want to solve the “TeamViewer wake on LAN not working” problem, then just follow our tips.
Hope it works. And do you have any other problems, you’d like to share with us and other readers?
So leave it in the comment box.